You might know this as commercial awning repair. Same work, either name. We repair, recover and replace awnings for storefronts, restaurants and homes. Sound frames usually only need new fabric, which costs a fraction of a full replacement, and we will tell you honestly which one you are looking at before you commit to anything.
Every awning gets field-measured, since frames drift out of square over time. Patterns cut from old fabric are unreliable because the old cover has shrunk and stretched.
Old cover stripped, frame inspected and repaired, new panels sewn or heat-welded and stretched over the bars. The most common commercial job by volume.
Rewelding cracked joints, replacing rusted outriggers, and repainting or powder-coating tube. Done while the frame is bare, because doing it later means pulling fabric twice.
Painted, heat-applied vinyl, or sewn appliqué copy and logos. Appliqué costs more up front and outlives applied vinyl, which chalks and peels at the edges.
Patching tears, resewing blown seams, and relacing fabric to the frame. Worth doing on fabric under about five years old and still holding color.
Taking the frame down, hauling it to a shop, and rehanging it. Some jobs are recovered in place on a lift when the frame cannot come off the wall.
If you are seeing any of this, call us before it gets more expensive.
| What you are seeing | What it usually means |
|---|---|
| Water pools in a low spot after rain | Fabric has stretched or a bar has bent; seams will split next |
| Color has gone chalky and uneven | Dyed-on fabric near end of life; recover, do not clean |
| Rust streaks running down the storefront | Steel frame is corroding under the cover; strip and treat |
| Fabric flaps loudly in wind | Lacing or fasteners have loosened; frame damage follows |
Someone measures the frame in place, photographs the brackets and wall attachment, and confirms whether the frame can come down or has to be covered in place.
Sign permits, landlord design approval, and sidewalk closure permits get pulled before fabrication. Copy and color changes are what trigger review, and lead times run days to weeks.
Panels are cut from pattern, sewn or heat-welded, and graphics applied. Expect two to four weeks from approved art, longer if the fabric color is not a stocked item.
Old cover comes off, welds and brackets get inspected, and rusted steel is treated or replaced. Any frame refinishing happens here while the tube is bare.
New cover is stretched over the frame and laced or screwed off. Fabric should be drum-tight with no pooling spots, since standing water is what kills seams first.
Confirm drainage, check lettering alignment from across the street, and get the fabric warranty document and the manufacturer cleaning instructions in writing.